Loom Ties, Cable Mounting Parts and Grommets for 2002 Mercedes-Benz C230

Description: 80MM. 2,5X102MM
Diameter: 7,9mm
Inside diameter: 0,75mm
Outside diameter: 22 mm
Material thickness: 1mm. AERATION/VENTILATION. 2,5X102MM
Diameter: 7,9mm
Inside diameter: 0,75mm
Outside diameter: 22 mm
Material thickness: 1mm.

Description: Compressed air lines bracket to air spring. 4.8x302 mm
diameter: 5mm. Fire wall,engine compartment 300x5.0mm. 4.8x302 mm
diameter: 5mm. Hose fastening 300x5.0mm. 4.8x302 mm
diameter: 5mm. Electrical wiring harness to fuel tank. 4.8X302 MM
Diameter: 5mm.

Description: Console to instrument panel. M5x25.

Description: Mounting material. 4.6 X 150 MM (D=5MM)
Diameter: 5mm
Material thickness: 1,2mm.

Description: Hose to body.

Description: For hose to body. 20 mm. De-aeration line. 20 mm. Cable harness mounting. 20 mm. Wiring harness. 20 mm. Bracket mounting. 20 mm. Hose to engine. 20 mm. Mounting, vent lines to corrugated hose, right. 20 mm. Adapter cable to fan shroud. 20 mm. Filler neck. 20 mm. Breather line to engine. 20 mm.

Description: At gas generator housing. 16.4x15. Electric cable to co-driver's airbag collapsible collar. 16.4x15. Tail lamp cable harness to fuel pump bracket. 16.4x15. Main cable harness to front cross member. 16.4x15. Adapter line. 16.4x15. Mounting, temperature sensor. 16.4x15. Temperature sensor catalyst. 16.4x15. Temperature sensor to oil pan. 16.4x15. Starting cable to transmission. 16.4x15. Cable to left side member. 16.4x15.

Description: Temperature sensor mount. 24X10 MM.

Description: To o2 sensor bracket. 23 x 24 mm. Left bracket. 23 x 24 mm.

Description: Dome lamp cable harness. 9.5x13 mm. Mounting, cover. 9.5x13 mm. (fuel pipe to wheel arch panel angle). 9.5x13 mm. Line attachment. 9.5x13 mm. For fuel pipe at angle, wheel arch pan up to chassis 7519994. 9.5x13 mm.

Description: From front plug connection to fuel pump. 15 x 32 mm. Engine hood. 15 x 32 mm. Cable mounting. 15 x 32 mm. Piping to firewall. 15 X 32 MM. Cable harness to side part. 15 x 32 mm. Water drain, rear. 15 x 32 mm. On left side panel,rear. 15 x 32 mm.

Description: Lambda sensor line mount. 18 X 14 MM. Cable conduit. 18 x 14 mm.

Description: 30x40 mm.

Description: 15 x 15 mm.

Description: Oxygen sensor. 02 sensor upstream of catalytic converter. O2 sensor line.

Description: Line mounting. 5 mm. Line aux.heater left rear seat floor. 5 mm. Damper strut delivery line. 5 mm. Pressure line to shock-absorber strut. 5 mm. Front brake cable to tunnel. 5 mm. Pipe line to wheelhouse. 5 mm. Rear floor assembly right. 5 mm. To right rear wheelhouse. 5 mm.

Description: Bleed line mount. 2 X 8-9 MM. Bleed lines. 2 X 8-9 MM. Line holder. 2 x 8-9 mm. Hose. 2 x 8-9 mm. Purge line to ac line. 2 x 8-9 mm. Brake line to brake line. 2 X 8-9 MM.

Description: Cable harness mounting.

Description: Auxiliary fan. 2.0 - 4.0 mm2. Red 2,0 - 4,0 mm2. 2.0 - 4.0 mm2.

Description: Belt tensioner squib. 0.7 - 2.4 mm2. Green 0,7 - 2,4 mm2. 0.7 - 2.4 mm2.

Description: Violet. 0.8 MM2. 0,8 mm2. 0.8 mm2.

Description: SOLDERING SLEEVE. 1.3 MM2
Leitungsquerschnitt Min/Max: 1,3mm2. Transparent. 1.3 MM2
Leitungsquerschnitt Min/Max: 1,3mm2.

Description: Oxygen sensor. 5 mm. Bracket mounting. 5 mm. Control module,auxiliary fan. 5 mm.

Description: For sheet thickness 0.8-3.5 mm. 13X18 MMDiameter: -Inside diameter: -Outside diameter: -Material thickness: -. SENSOR LINE TO SHIELD. 13X18 MMDiameter: -Inside diameter: -Outside diameter: -Material thickness: -. TO LEFT REAR CRANKCASE, FOR ENGINE WIRING H ...

Description: Ground cable. Ground lead and speed-sensitve power steering wiring harness.

Description: Left seat frame locking mechanism. 5 mm. Fastening upholstery strip.

Description: Sensor line. O2 sensor. Oxygen sensor contact.

Description: Sensor line at left transmission bellhousing. Rear transmission case. Sensor cable to right transmission bell housing.

Description: To starter flange top. Cable harness alternator. On upper starter bolt to generator wiring harness fastening. Generator wiring harness to starter, rear left.

Description: Sealing. To equipment compartment. 24.5x28.5 mm. 24.5 x 28.5 mm. To plug the free outlets at case. Control module box. Apparatus case and control units.

Description: 10-hole.

Description: In floor,above rear rear axle d=26 mm. For cover plate. In rear end floor.

Description: Left.

Description: Brake line to transverse control arm, front left. Right front brake line to tunnel, bottom.

Description: For weld stud T5. 4,6X155 MM. Insulation mounting. 4,6x155 mm. To line. 4,6x155 mm. Mounting material. 4,6X155 MM. Tank breather line. 4,6x155 mm. Line mounting. 4,6X155 MM. Return. 4,6X155 MM. Drain hose to body-in-white. 4,6X155 MM.

Description: 185 mm. 185 mm. 170mm. 185 MM. 150mm. 185 MM.

Description: Cable harness mounting. 75 x 40 mm.

Description: Scuff protection for electric cables left. For curtain. Felt strip. Soundproofing. Dampening, antenna amplifier to rear-end door. In liftgate trim 70X55X3MM.

Description: At transmission case top cover. To transmission left.